
Product Information
Metal offcuts, stacks of wood, and packaging trash fill your aisles and create trip hazards. Conventional scrap bins can't take the abuse - abrasive loads crack welds, bend fork channels, and distort bottoms. Bare or painted steel rusts. Leaking seams dribble coolant on the floor. And operators get out of the forklift to unload every load by hand, wasting hours every shift.
It's a thing of the past with the 2 CU. YD. Powder-Coated Self-Dumping Hopper.
Key Features
- Bumper-Activated Dumping: The bumper release triggers the hopper's tipping mechanism when it contacts a dumpster. The body tilts forward at 63 degrees to discharge material, then returns upright for the next handling cycle.
- Forklift Safety Chain: A 1/4" safety chain provides an additional connection between the hopper and forklift during handling. This restraint helps keep the unit secured during elevated dumping operations.
- Rugged Rockers and Box: A 12-gauge steel box and robust rockers carry loads up to 2,500 lbs. The frame keeps its shape under daily forklift use, so you replace fewer bins.
- Continuous Weld Seams: Filled interior welds help contain wet shavings, sludge, and cutting fluids. Aisles stay dry, and slip risks drop.
- Reinforced Fork Pockets: Wide 34" W x 3" H pockets fit standard lift truck forks. They spread the load across the tines and keep the hopper steady in transit.
Technical Specifications
Verify these specifications against your forklift and aisle clearances before ordering.
- Capacity: 2 cubic yards per load.
- Maximum payload: 2,500 lbs for dense scrap and chips
- Box construction: 12-gauge steel with robust rockers
- Tilt angle: 63 degrees for full, efficient unloading
- Fork pocket openings: 34" W x 3" H, sized for standard lift truck forks
- Safety restraints: 1/4" chain and mechanical latch lock
- Release: bumper-activated, self-returning to upright
- Finish: electrostatic powder coat for corrosion resistance
- Colors: Red, Blue, Yellow, and Silver
- Shipping: Free in the US
Material & Finish
Your finish determines the hopper's lifespan. Bare or spray-painted steel chips and rusts quickly on a busy shop floor. Powder coating holds up far better. We pre-treat the carbon steel, then charge dry polymer powder electrostatically so it wraps every edge and weld. An industrial curing oven then melts the powder. It flows, cross-links, and bonds to the steel as a tough, non-porous skin.
Unlike liquid paint, powder coating needs no solvent carrier. It typically builds a thicker, more uniform film in one pass. That film resists scratches from sharp metal turnings and blocks stains from cutting oils. It also helps the hopper keep its color. Fewer touch-ups and fewer replacements protect your capital budget. Choose this hopper when you need a scrap container that lasts through heavy daily forklift duty.